Sensors & feedback.
Feedback decides how smoothly and how precisely your drive runs. We choose it for your environment, not from a spec sheet.
Matched to the loop and the environment.
Hall, encoder, resolver — by environment as much as accuracy
Hall sensors are robust and inexpensive, magnetic encoders cope with dust, oil and vibration, optical encoders give the highest accuracy. We choose by your environment and your accuracy target.
Chosen by environment, not just by accuracy
Sensorless where it earns its place
Where your application allows it we leave the sensor out. That saves cost, space, a connector and one more part that can fail.
One less part that can fail
Measured, not assumed
We measure the feedback chain on real hardware before we tune the control. A datasheet error stays invisible until the drive misbehaves.
Measured on hardware, not assumed
sensing sits between the motor and the control: it enables or limits the commutation scheme and sees every imperfection of the gearbox.
How we deliver it — we specify the feedback the control needs and integrate it into the drive, realised within the motor and electronics — chosen for the loop and the environment, owned by DRIVS.
Let's talk about your application.
Tell us about your drive challenge — we'll find the right solution.